Add fxload3 utility needed for QHY cameras

2023-02-25 13:08:23 +01:00
parent adb7cfb329
commit 0881abee6b
17 changed files with 2328 additions and 0 deletions
@@ -0,0 +1,87 @@
+Summary:		EZ-USB utility program
+Name:			fxload
+Version:		VERCODE
+Release:		1
+Group:			Applications/System
+License:		GPL
+Url:			http://linux-hotplug.sourceforge.net/
+Source0:		%{name}-%{version}.tar.gz
+
+%description
+This package contains utilities for downloading firmware to EZ-USB devices.
+EZ-USB devices use 8051-based microcontrollers that have been enhanced with
+registers, buffers, and other device-side support for USB transactions.
+
+It currently supports devices based on the Anchorchips EZ-USB, as well as the
+Cypress EZ-USB FX (which is almost completely source compatible) and EZ-USB FX2
+(which is not).  All of these support full speed (12 Mbit/sec) transfers.  The
+FX2 also supports high speed (480 Mbit/s) transfers, introduced in USB 2.0.
+
+This version of FXLOAD supports optional use of two-stage loading, where 
+special device firmware is used to support writing into off-chip memory such
+as RAM (when firmware neeeds more than about 8 KBytes of code and data) or,
+for firmware development, I2C serial EEPROM.
+
+%prep
+%setup -q
+
+%build
+# Build any compiled programs in the source tree.
+make all CFLAGS="%optflags -DFXLOAD_VERSION=\\\"%version\\\""
+
+%install
+make prefix=%buildroot install
+
+# --
+# The utils package contains utility programs that certain devices
+# might need along with the core hotplug in order to boot up the
+# device in question.
+%files
+%defattr(-,root,root)
+/sbin/fxload
+
+
+%changelog
+* Mon Apr 01 2002 David Brownell <dbrownell@users.sourceforge.net>
+- fixed/updated RPM build and Makefile
+- Makefile automatically embeds version into specfile and binary
+- fxload handles 2nd stage loader
+
+* Mon Jan 21 2002 David Brownell <dbrownell@users.sourceforge.net>
+- update fxload rpm description.  also, manpage now installs.
+
+* Mon Jan 14 2002 Greg Kroah-Hartman <greg@kroah.com>
+- split fxload specific stuff out of the base hotplug.spec file
+  to keep the hotplug core arch independant
+
+* Mon Jun 11 2001 Steve Williams <steve@icarus.com>
+- The install process is now in the comon makefile, so that non-
+  rpm installs can work. This spec file thus invokes that install.
+
+* Fri Jun 8 2001 Steve Williams <steve@icarus.com>
+- added the /var/run/usb directory to spec file
+
+* Tue Apr 24 2001 Greg Kroah-Hartman <greg@kroah.com>
+- added the hotplug.8 manpage written by Fumitoshi UKAI <ukai@debian.or.jp>
+
+* Fri Mar 2 2001 Greg Kroah-Hartman <greg@kroah.com>
+- tweaked the post and preun sections to fix problem of hotplug
+  not starting automatically when the package is upgraded.
+
+* Wed Feb 28 2001 Greg Kroah-Hartman <greg@kroah.com>
+- 2001_02_28 release
+
+* Wed Feb 14 2001 Greg Kroah-Hartman <greg@kroah.com>
+- 2001_02_14 release
+
+* Wed Jan 17 2001 Greg Kroah-Hartman <greg@kroah.com>
+- changed specfile based on Chmouel Boudjnah's <chmouel@mandrakesoft.com> comments.
+
+* Tue Jan 16 2001 Greg Kroah-Hartman <greg@kroah.com>
+- tweaked the file locations due to the change in the tarball structure.
+- 2001_01_16 release
+
+* Mon Jan 15 2001 Greg Kroah-Hartman <greg@kroah.com>
+- First cut at a spec file for the hotplug scripts.
+- added patch to usb.rc to allow chkconfig to install and remove it.
+